-
Adhesive Dr. Boat + Large reinforcing mesh XL
The Symbol :
541
40.00
| Shipping within | 24 hours |
| Shipping price | 0 |
Zadzwoń i zamów: 795244917 lub 577757706
| Leave your phone |
Adhesive Dr. Boat + Large reinforcing mesh XXL
*Professional 2-in-1 PVC adhesive for DR.BOAT swimming pool inflatable boat
EFFECTIVE ADHESIVE FOR PONTOONS, POOLS AND OTHER PVC PRODUCTS.
Adhesive DR. BOAT 2 in 1 is an innovative combination of a liquid patch and glue for various plastics.
Liquid patch - it is nothing more than PVC in a liquid form, i.e. the original material from which the repaired product was actually made.
We offer an innovative and specialized new adhesive for the repair of PVC products. It can be used to glue pontoons, swimming pools, tarpaulins and other objects made of plastic.
DR.BOAT - is a product capable of removing virtually any defect caused to a PVC product at the molecular level.
The main advantages and distinguishing features of DR. BOAT:
- The glue is specialized. The formula of the adhesive is designed in such a way that it can be used to repair items used in fresh and salt water.
- You can use it as standard glue for sticking patches or as a liquid patch.
- During gluing, it does not require the use of hardener and heating.
- After drying, it retains the strength and flexibility of the glued object.
- It is durable and flexible.
- The glue is transparent and can be used to repair items of different colors.
DR.BOAT - is a product capable of removing virtually any defect caused by a PVC product at the molecular level.
Dr. BOAT is not an ordinary glue, it is an innovative combination of a liquid patch and PVC glue with a unique chemical composition, giving it unique properties, such as:
· High adhesion,
· UV resistant,
· Vulcanization (monolith with product),
· Flexibility,
· The original properties of the material structure are preserved,
· Simplicity of use.
Adhesive DR. BOAT 2 in 1 can be used to repair countless products in any situation:
- repair of pontoons and inflatable boats, tents and inflatable tents, tarpaulins for trailers (e.g. after an attempt to break into a truck trailer)
- repair of inflatable pools, inflatable houses, balls and toys for children
- repair of plastic parts in the car, car bumpers, caravan roof
- repair of trampolines, commercial pavilions, kayaks and catamarans
- repair of swimming suits, water shoes, gloves, caps
- bonding shoe soles, bicycle and motorcycle saddles, car seats
- repair of water beds, air mattresses
Important! If the glue is used, transported or stored in the cold season at a temperature below + 18°C, place the glue on a room radiator or in warm water (approximately 50 - 60°C) for 2 - 3 hours before use.
Brief instructions for use:
Variant with a patch:
We carefully degrease the glued surfaces. We lubricate the patch and the glued object with a thin layer of glue. We put the patch on the object to be glued and press it down and keep it for 1 minute. The minimum drying time is 6 hours, but it's best to wait 24 hours.
A variant without the use of a summerka:
We degrease the damaged place.
The glued object should be secured against moving.
Apply glue to the damaged place with a thick layer on the surface 1 cm larger than the damage.
We wait 20 minutes.
We apply a second thick layer.
After 5 hours, remove the protection against movement and after 24 hours the glued object can be used.
In the case of larger damage (cut above 3 cm), the repair is carried out using a reinforcing mesh, which comes complete with glue. We prepare a mesh 2 cm larger than the damage. Thoroughly degrease the surface. We apply glue to the damaged place and press it into the mesh. After 20 minutes, apply the glue again on the surface 1.5 cm larger than the previous layer. The glued place is sufficiently strong after 24 hours.
The product does not freeze at a relative negative temperature, but it is not worth repairing your product at low temperatures.
*Reinforcing mesh XL duża
Reinforcing mesh, 30 cm long and 7 cm wide.
Used for reinforcement or repair together with Liquid Patch PVC, Liquid PVC Ulow, Dr. Boat etc.
We recommend using this mesh when repairing cuts or holes over 2 cm.
Directions for use:
1) Clean and degrease the damaged place.
2) Put on the net.
3) Apply a layer of liquid PVC on top.
It is important to apply the liquid PVC wider by min. 1 cm than the edges of the mesh on each side.
You should also wait a few hours after the repair before using the equipment you are repairing.
The mesh forms a uniform layer with liquid PVC and the repaired area will be strengthened beyond the original strength of the equipment.
There is currently no comments or ratings for this product.
Professional e-commerce software
