Professional PVC Glue Dr. Boat + Liquid Patch PVC Liquid Patch
DR.BOAT 2 IN 1 specialized ADHESIVE FOR PVC inflatable boats and pools (glue and liquid patch) with a cold welding effect.
EFFECTIVE GLUE FOR PONTOONS, POOLS AND OTHER PVC PRODUCTS.
We offer an innovative and specialized new adhesive for the repair of PVC products. It can be used to stick pontoons, swimming pools, tarpaulins, etc..
Main advantages and differences from other adhesives:
The glue is specialized. The formula of the adhesive is designed in such a way that it can be used to repair items used in fresh and salt water.
You can use it as a standard patch glue or as a liquid patch.
During gluing, it does not require the use of hardener and heating.
After drying, it retains the strength and flexibility of the glued object.
It is durable and flexible.
The glue is transparent and can be used to repair items of different colors.
Brief instructions for use:
Variant with a patch:
We carefully degrease the glued surfaces. We lubricate the patch and the glued object with a thin layer of glue. We put the patch on the object to be glued and press it down and keep it for 1 minute. The minimum drying time is 6 hours, but it's best to wait 24 hours.
A variant without the use of a summerka:
We degrease the damaged place.
The glued object should be secured against moving.
Apply glue to the damaged place with a thick layer on the surface 1 cm larger than the damage.
We wait 20 minutes.
We apply a second thick layer.
After 5 hours, remove the protection against movement and after 24 hours the glued object can be used.
In the case of larger damage (cut above 3 cm), the repair is carried out using a reinforcing mesh, which comes complete with glue. We prepare a mesh 2 cm larger than the damage. Thoroughly degrease the surface. We apply glue to the damaged place and press it into the mesh. After 20 minutes, apply the glue again on the surface 1.5 cm larger than the previous layer. The glued place is sufficiently strong after 24 hours.
DR.BOAT - is a product capable of removing virtually any defect caused to a PVC tissue product at the molecular level.
· High adhesion,
· UV resistant,
· Vulcanization (monolith with product),
· The original properties of the material base are preserved.
The product does not freeze at a relative negative temperature, but it is not worth repairing your product at low temperatures.
Liquid Patch PVC Liquid Patch tube 20ml
When making a purchase, please indicate the color in the sales form. If no color is provided, we will send a random one.
"Liquid patch" is a light and safe repair of a PVC pontoon in any conditions. Now you don't need to use a dryer, patches or glue!
It is nothing but PVC in liquid form. That is, the original material from which the product was actually made.
Perfect adhesive for inflatable boats, inner tubes, pontoons, tarpaulins and PVC pools in any conditions without heating or patches.
How it's working?
Just drip a few drops from the tube into the hole and wait 24 hours. Ready! The hole in the PVC is stuck.
If the cut is large, sew it together and pour glue from the tube. We are waiting 24 hours .
The uniqueness of the liquid patch:
Dissolves the layer of repaired material, creating a uniform surface.
MATERIALS TO WHICH IT CAN BE APPLIED: PVC, trilaminate, neoprene, gore-tex, leather, eco-leather, polyester.
A WIDE RANGE OF COLORS.
· High adhesion,
· Thermal resistance,
· Maintaining the original features and properties of the repaired equipment,
· Resistant to UV radiation,
· Simplicity of use,
· Extending the service life of repaired equipment.
A liquid patch is applied in one layer! The second layer can harm the first, it will dissolve it.
Work should be done on the non-inflated product. The damaged surface must be degreased.
There is currently no comments or ratings for this product.