-
Professional PVC 2in1 adhesive DR.BOAT + Liquid Patch PVC Ulow tube 20ml + Reinforcing mesh
| Shipping within | 24 hours |
| Shipping price | 0 |
Zadzwoń i zamów: 795244917 lub 577757706
| Leave your phone |
Professional PVC 2in1 adhesive DR.BOAT + Liquid Patch PVC Ulow tube 20ml + Reinforcing mesh
Professional 2-in-1 PVC adhesive for DR.BOAT swimming pool inflatable boat
When making a purchase, please indicate the color in the sales form. If no color is provided, we will send a random one.
"Liquid patch" is a light and safe repair of a PVC pontoon in any conditions. Now you don't need to use a dryer, patches or glue!
It is nothing but PVC in liquid form. That is, the original material from which the product was actually made.
Perfect adhesive for inflatable boats, inner tubes, pontoons, tarpaulins and PVC pools in any conditions without heating or patches.
How it's working?
Just drip a few drops from the tube into the hole and wait 24 hours. Ready! The hole in the PVC is stuck.
If the cut is large, sew it together and pour glue from the tube. We are waiting 24 hours .
The uniqueness of the liquid patch:
- Dissolves the layer of repaired material, creating a uniform surface.
- MATERIALS TO WHICH IT CAN BE APPLIED: PVC, trilaminate, neoprene, gore-tex, leather, eco-leather, polyester.
- A WIDE RANGE OF COLORS.
Features:
· High adhesion,
· Thermal resistance,
· Flexibility,
· Maintaining the original features and properties of the repaired equipment,
· Waterproof,
· Resistant to UV radiation,
· Simplicity of use,
· Extending the service life of repaired equipment.
A liquid patch is applied in one layer! The second layer can harm the first, it will dissolve it.
Work should be done on the non-inflated product. The damaged surface must be degreased.
Reinforcing mesh
Reinforcing mesh, 25 cm long and 5 cm wide.
Used for reinforcement or repair together with Liquid Patch PVC, Liquid PVC Ulow, Dr. Boat etc.
We recommend using this mesh when repairing cuts or holes over 2 cm.
Directions for use:
1) Clean and degrease the damaged place.
2) Put on the net.
3) Apply a layer of liquid PVC on top.
It is important to apply the liquid PVC wider by min. 1 cm than the edges of the mesh on each side.
You should also wait a few hours after the repair before using the equipment you are repairing.
The mesh forms a uniform layer with liquid PVC and the repaired area will be strengthened beyond the original strength of the equipment.
